Motor Homes/Travel Trailers/Toy Haulers Window Tinting

Does your motor home get to HOT during the daytime when your actually using your motor home at a RV resort or going on a trip ?

 

Does your ac unit in the motor home take a long time to remove the THE HEAT THAT BUILDS UP INSIDE YOUR MOTOR HOME?

JUST BY ADDING WINDOW TINTING TO YOUR MOTOR HOME YOU CAN BLOCK THE HEAT COMING THROUGH YOUR WINDOWS TO KEEP IT COOLER INSIDE.

When it comes to adding window tinting to a motor home you don’t want to wast your money buy adding auto tinting to your Class A motor home that you spent your retirement on.. which is going to fade/purple how long depending on what brand and series auto film they used..YES IT’S GOING TO FADE… IT’S JUST A MATTER OF WHEN

At PRO-TECH SERVICES we don’t use auto tint on motor homes/travel trailers/toy haulers. We quote you on residential and commercial window tint .. which the construction of the film is better and the specs of the film do more for the customer.

example

  1. higher heat blocking
  2. higher glare blocking
  3. last longer up to 10 maybe 15 years
  4. warranty cover film and labor (no questions asked warranty) unlike most shops that do auto tinting you fight to get your warranty to cover issues
  5. A lot more choices of film for the customer
  6. all film block 99% of the uv rays

 

 TINTINTG AN RV AT RV COUNTRY IN FORT MYERS FL 

 

 

 

INSIDE OF RV AT RV COUNTRY IN FORT MYERS

 

 

 

 


TRAVEL TRAILER BEING TINTED AT CUSTOMER HOME IN CAPE CORAL FL

 

 

 

contact PRO-TECH SERVICES TO GET A QUOTE ON TINTING YOUR MOTOR HOME/TRAVEL TRAILER/TOY HAULER 239-560-3498

why you don’t buy electronics on online or ebay

Customer calls us on 7-9-17 tells us that he’s having issues with installing this double din radio into 2000 ford f150.. the oem harness has been cut and he’s trying to hard wire double din radio harness to cut radio harness..

 

So for us to help him we ask him to come to our shop.. he tell us once he get to us it came on yesterday but no sound but now it will not power up at all. We bust out our power probe test meter  we find out no power on the constant power wire or 12 volt ignition switched power wire. So we start checking fuses under the dash. We fine out the radio fuse is blown and we replace it and now we have constant power at the radio still can’t find why there is no 12 volt ignition switch power at the radio. So we run an 18 gauge red wire from the radio to the fuse panel and install a fuse connector on a fuse that only has power when the car is running.. Now we get constant power and 12 volt ignition switch power at the radio solder our connection and the radio powers up but we get no sound..  

Now this was a 6.5″ 2DIN TOUCH SCREEN Car Stereo DVD Player Bluetooth Radio no name ebay radio paid 109.00 free shipping 

 

 

 

 

 

 

 

after spending sometime checking to see if oem speakers work or even in the doors I come to the conclusion that the output from the radio is bad and customer needs to send back the radio to ebay seller for replacement warranty..

on the 7-16-2017 customer brings me a radio that he said that he just got it suppose to be a brand new replacement for the warranty radio .. Funny thing is when they email ebay seller they said keep the broken radio and we will ship you a new one. They didn’t even care to get old broken merchandise back.. so I unbox the new radio and plug it into the radio harness that we wired in the week before and radio comes on and power up function perfect expect still no sound. I start searching for info on the web for solutions or people that have this product with the same issues. can’t find anything after about an hour of trying to get sound out of the radio i accidently hit the eject button for the cd player and out comes a cd..

so now I tell the customer I’m guessing this was someone else warranty radio that for got to remove their cd before they sent it back to ebay seller. Now you have it and it no different from the first radio you got from ebay seller..NO SOUND

I take an old jvc single din radio i use for testing and use my power probe test meter to power up the jvc radio and cut a rear speaker wire off the harness of the ebay radio and connect the wires to the jvc radio turn it on and now we have sound coming out the trucks speakers but coming from my test radio. customer is pissed off royally ..

So now my customer has 2 broken double din radio from ebay with no sound non brand chinese crap radio and out $109.00 

This is why you don’t buy items online because seller can send you anything they want. you don’t have any way of getting in touch with most of them they may give you an email address but don’t respond or there number only goes to voice mail.

If the customer would have bought a radio from us .. It would have been new in sealed box and no issues.. with a labor warranty and a manufacture warranty from either kenwood,sony,jvc,power acoustik etc..

SUPPORT YOUR LOCAL BUSINESSES AND KEEP THE MONEY FLOWING LOCAL .. BUY LOCAL HELP OUT SMALL BUSINESS AND YOUR COMMUNITY 

ebay radio pictures stay away from

ROCKFORDFOSGATE PAIR OF AMPS THAT DO NOT NEED A BATTERY CABLE FOR POWER


 

PM100X1K

Punch Marine or Car 100 Watt Full-Range Mono Amplifier (pair)

The PM100X1 is a 100 Watt dynamic power mono amp using DC and AC voltages present on existing radio speaker outputs. This design allows connection to a speaker wire without running a B+ cable. It also presents a safe load to the radio amp circuit to eliminate excessive wear and tear on the radio, making it ideal for OEM and aftermarket radio integration. The conformal coated PCB allows for mobile, motorsport and marine applications. PM100X1K “KIT” ships with 2 pcs.

  • Patented BTL Powered “FreeLoad” Technology (US 9,438,181 B1)
  • Harvests both B+ and Audio Signal From Standard Head Unit Speaker Outputs
  • Uses Stored Energy from BTL Amplifier to Produce Dynamic Power of Over 100W
  • Current Limited to Protect Head Unit for Both 4 Ohm and 2 Ohm Configurations
  • High Level Turn On
  • Optional B+ Connection for Non-Standard Speaker Outputs
  • Selectable 4 and 2 Ohm Play
  • 60, 80, and 100 Hz Selectable 12dB/Oct HP Butterworth Crossover
  • Small Stealth Package that Allows for Anywhere Installation
  • Pig Tail Connectivity for Easy Installation
  • Extruded Aluminum Heat Sink
  • Muted turn on
  • Thermal Protection
  • Short Circuit & Over Voltage Protection
  • Discrete surface mount technology
  • CEA-2006 Compliant & CE Compliant
  • Sold in pairs (left/right)

A quick view on how such a small amp works 

 

These pair of amps are water resistance and can be place in a door of a car.. but don’t recommend it . They work great for marine use when just need little more power for your 2 and 3 way speaker systems..100 watts max output. These amps are sold in pairs there is a couple of ways to use these.

example 1a

  1. one amp to power up the left side front/rear speakers
  2. one amp to power up the right side front/rear speaker

 

example 1b

  1.  one amp to power the front left/right speakers
  2.  one amp to power the rear left/right speakers

Element Ready™ – Amps

These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.

 

Our Moto-marine amplifiers have not only the capabilities you expect a Rockford Fosgate amp to have, but we have designed them to stand up to the environmental conditions you are likely to subject them to. With corrosion resistant stainless steel hardware and two-part epoxy coated circuit boards, these units are designed with you in mind. Whether on the lake, on the road or in the back woods these amplifiers are ready for an adventure.

Dust – We make sure that displays and motor structures are sealed up tight so they look as clear as possible and perform day in and day out no matter how many times you hit the trails.
UV Inhibitor Materials – Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in accordance with ASTM D4329 testing and certification procedures.
Corrosion Protection (Electronics) – Two part epoxy coated PCB boards prevent corrosion of critical components due to exposure in moisture rich environments.
Stainless Hardware – Stainless hardware is used due to its natural resistance to corrosion and rusting. This ensures that electrical connections will not degrade over time due to exposure to the elements.


ecoPUNCH

A series of proprietary Rockford Fosgate technologies designed to deliver all the PUNCH, while consuming less juice.

 

Today’s audio systems sacrifice efficiency and performance for commonization and cost. Rockford Fosgate engineers addressed the inherent redundancies in today’s solutions by working with existing power and signal processing capabilities already in the vehicle, instead of bypassing them. The result is a solution that features the clarity and hard-hitting dynamics expected from Rockford Fosgate in a form-factor that’s lighter, costs less, is easier to integrate, and consumes less power than comparable systems.

 


FreeLoad

U.S. Patent 9,438,181 B1

Patented BTL powered “FreeLoad” technology is a small amplifier that does not require a B+/GND connection to produce power.

 

Our Patented FREELOAD technology not only takes in the audio signal from the source unit to amplify, but also to power the PM100X1. This is accomplished by presenting the source unit’s amplifier circuit a constant “load” relative to the radios capability; 2-Ohms for a 2-Ohm radio or 4-Ohms for a 4-Ohm radio. By doing this, the radio is producing consistent output power even as the signal’s sine wave is dropping back to zero. It is this “free” energy that charges the internal capacitor bank for the amplifier to produce higher output power when needed.


 

CEA-2006

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.



crossover 60/80/120

 

 


 

 

 


SPECIFICATION OF PMX1K

CEA-2006 Compliant: CEA-2006 Compliant
60W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels: 1
Total Power
(Sum of Rated Power):
100 Watts
Dynamic Power
(PVC/PowerCube®):
61 Watts x 1 @ 4-Ohm
109 Watts x 1 @ 2-Ohm
Bridgeable: No
Frequency Response: 60Hz to 20kHz +/- 1.0dB
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
Signal-to-Noise (CEA): >90 dB
Channel Separation:
Common Mode Rejection: >55 dB
Crossover Controls: High-Pass:
Selectable 60Hz, 80Hz, 100Hz @ 12dB/octave Butterworth
Heat Sink Type: Extruded aluminum
Cooling: Convection
Visual Indicators: Power/Protect LED
Operating Voltage: 9 – 16 VDC
Dimensions (H x W x D): 1.3 x 3 x 3.9 (in)
3.3 x 7.62 x 9.91 (cm)

 


CONTACT PRO-TECH SERVICES FOR PRICES 239-560-3498

WINDOW FILM can’t be Installed on PLASTICS Windows

Here is an article from JOHNSON WINDOW FILM on why you can’t tint Plexiglass, polycarbonate and lexan..

TintMan Tips Article003_2017-R2plastic

Why you can’t use automotive tint on Homes or Businesses

Here is an article for why you can install automotive window tint on homes and businesses .. article by Johnson Window Film

TintMan Tips Article010_2017

 

 

How do you protect your skin in doors “Window Tinting”

You use sunblock to protect your skin while outside from the sun, but what are you doing to protect your skin while indoors…

Non-Tinted windows will allow the harmful sun damaging energy to still affect your skin when sitting next to Non-Tinted windows for long periods of time.. YES YOU CAN STILL GET A SUNBURN BY SITTING NEXT TO NON-TINTED WINDOWS.. CALL PRO-TECH SERVICES TO HAVE YOUR HOME OR BUSINESS WINDOWS TINTED 239-560-3498

SKIN CANCER AWARENESS

No matter your how awesome your homes view is, window film can help boost your Energy Efficiency and Reduce the Sun Damage. Call Pro-Tech Services 239-560-3498 for us to come out to your location and give you a quote. johnson window film/pro-tech services 

25 years tinting swfl

 

Enjoy the privacy of window tint in your home or business

With window tinting you can have an extra layer of protection to give you privacy in your home or business.. By selecting  the right darkness of window tint it can give you the privacy you need during the day.

Just because it blocks the people from seeing in to your home or business doesn’t mean it keeps the home owner or business owner from see out the windows from inside.

Daylight natural 20 from JOHNSON WINDOW FILM. from the outside it give your all the privacy you need.

Far left window has been stripped and re-tinted top and bottom. See how clear your view is looking out. the rest of the windows are still having the old film removed

 

UV RAYS AND INTERIOR FADING

We all have a favorite area in your home to take in the sun. But, are you protected from the suns damaging UV rays passing through your non-tinted window?UV RAY CHART 

UV RAY CHART . UV RAYS ARE NOT THE ONLY THING COMING FROM THE SUN TO MAKE THINGS FADE (WOOD FURNITURE AND FLOORING,CARPETS.CURTAINS)

 

 

 

EXPENSIVE WOOD FLOORS  THAT FADED FROM NON-TINTED WINDOWS

 

 

high dollars curtains faded over time from non-tinted windows

 

 

 

custom jewelry box faded and the antique table faded from being beside non-tinted windows

The Summer Heat is rising time to reduce the inside temperature

When your air conditioner can’t keep up anymore because the summer heat is over taking the interior of your home its time to call PRO-TECH SERVICES and have us come retrofit window tinting to your home or business windows to help reduce the heat.. By add window tinting you can lower your electric bill up to 30%